Building Your Own Robots by Gordon McComb

Building Your Own Robots by Gordon McComb

Author:Gordon McComb
Language: eng
Format: epub
ISBN: 9781119302445
Publisher: Wiley
Published: 2016-08-18T00:00:00+00:00


Use scissors to snip off the extra tape at the end of the shaft.

Cut a piece of aquarium tubing to about 3/4" length.

Wet both the tubing and the electrical tape (to make them slippery), and carefully push the tubing over the taped motor shaft.

Snip off the end of the tubing so there’s about 1/4" extra beyond the motor shaft. The rubber tubing should be about 1/2" long.

Repeat Steps 1 through 7 for the other motor. Remember, you need two!

Don’t cut the tubing too short! If you do, then when the motor is mounted on the robot, the “tires” may not properly touch the ground.



Download



Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.